Files

93 lines
1.5 KiB
Markdown
Raw Permalink Normal View History

2026-11-17 16:15:01 -05:00
# Consumer
## RTP sequence number handling
------------------------------------------------
INIT:
* rtpLastSeq: 1000
* rtpPreviousBaseSeq: 0
* rtpBaseSeq: 0
------------------------------------------------
packet (SYNC):
* seq: 3000
* rtpPreviousBaseSeq: 1000
* rtpBaseSeq: 3000
out:
* rtpLastSeq: 3000 - 3000 + 1000 + 1 = 1001
------------------------------------------------
packet:
* seq: 3001
out:
* rtpLastSeq: 3001 - 3000 + 1000 + 1 = 1002
------------------------------------------------
packet:
* seq: 3003
out:
* rtpLastSeq: 3003 - 3000 + 1000 + 1 = 1004
------------------------------------------------
packet (SYNC):
* seq: 4050
- rtpPreviousBaseSeq: 1004
- rtpBaseSeq: 4050
out:
* rtpLastSeq: 4050 - 4050 + 1004 + 1 = 1005
------------------------------------------------
packet:
* seq: 4051
out:
* rtpLastSeq: 4051 - 4050 + 1004 + 1 = 1006
------------------------------------------------
packet (DROP):
* seq: 4052
if (seq > rtpLastSeq)
* rtpBaseSeq++: 4051
------------------------------------------------
packet:
* seq: 4053
out:
* rtpLastSeq: 4053 - 4051 + 1004 + 1 = 1007
------------------------------------------------
probation packet:
* rtpLastSeq++ = 1008
out:
* rtpLastSeq: 1008
* rtpBaseSeq--: 4050
NOTE: probation packets should just be sent (assuming same RTP timestamp) **after** a video packet with `marker` bit set to 1.
------------------------------------------------
packet:
* seq: 4054
out:
* rtpLastSeq: 4054 - 4050 + 1004 + 1 = 1009